Sendinblue

The Sendinblue modules allow you to watch, create, update, list, and delete the contacts, lists, folders, email campaigns, events, emails, and SMS in your Sendinblue account.

Getting started with Sendinblue

Prerequisites

A Sendinblue account

In order to use Sendinblue with Integromat, it is necessary to have a Sendinblue account. If you do not have one, you can create a Sendinblue account at sendinblue.com/register.

The module dialog fields that are displayed in bold (in the Integromat scenario, not in this documentation article) are mandatory!

Connecting Sendinblue to Integromat

To connect your Sendinblue account to Integromat you need to obtain the API Key from your Sendinblue account and insert it in the Create a connection dialog in the Integromat module.

1. Log in to your Sendinblue account.

2. Click your Profile Icon > SMTP&API.

3. Copy the API v3 to your clipboard.

4. Go to Integromat and open the Sendinblue module's Create a connection dialog.

5. In the Connection name field, enter a name for the connection.

6. In the API Key field, enter the API key copied in step 4 and click Continue.

The connection has been established.

Contacts

Watch Contacts

Triggers when a new contact is created.

Connection	Establish a connection to your Sendinblue account.
Limit	Enter the maximum number of contacts Integromat should return during one scenario execution cycle.

List Contacts

Lists all contacts.

Connection	Establish a connection to your Sendinblue account.
Modified Since	Enter the date to list the contacts that were changed or updated on or after the specified date.
Limit	Enter the maximum number of contacts Integromat should return during one scenario execution cycle.

List Lists in Folder

Lists lists in a folder.

Connection	Establish a connection to your Sendinblue account.
Folder	Select the folder whose contact lists you want to list.
Limit	Enter the maximum number of contacts Integromat should return during one scenario execution cycle.

List Contacts in a List

Lists all contacts in a list.

Connection	Establish a connection to your Sendinblue account.
List	Select the list whose contacts you want to list.
Modified Since	Enter the date to list the contacts that were changed or updated on or after the specified date.
Limit	Enter the maximum number of contacts Integromat should return during one scenario execution cycle.

Get a Contact

Return details about a contact.

Connection	Establish a connection to your Sendinblue account.
Email	Enter the email address of the contact whose details you want to retrieve.

Add Existing Contacts to a List

Adds existing contacts to a list.

Connection

Establish a connection to your Sendinblue account.

List

Select the list to which you want to add an existing contact.

Email

Add the email address you want to add to the list:

Value

Enter the email address of the contact.

Create a Contact

Crates a contact.

Connection	Establish a connection to your Sendinblue account.
Email	Enter the email address of the contact.
Last Name	Enter the last name of the contact.
First Name	Enter the first name of the contact.
SMS	Enter the phone number with country code to receive the SMS.
Lists	Select the list to which you wanted to add the contact.
Email blacklisted	Select whether the email address is blacklisted: Yes No Not defined
SMS blacklisted	Select whether the SMS number is blacklisted: Yes No Not defined
Update enabled	Select whether the contact update is enabled: Yes No Not defined
SMTP blacklist Number	Add the email address transactions forbidden from the sender. This is applicable only if you enabled the update for the contact.

Update a Contact

Updates the contact.

Connection	Establish a connection to your Sendinblue account.
Email	Enter the email address of the contact.
Last Name	Enter the last name of the contact.
First Name	Enter the first name of the contact.
SMS	Enter the phone number with country code to receive the SMS.
Lists	Select the list to which you wanted to add the contact.
Unlink Lists	Select the list from which you want to remove the contact.
Email blacklisted	Select whether the email address is blacklisted: Yes No Not defined
SMS blacklisted	Select whether the SMS number is blacklisted: Yes No Not defined
Update enabled	Select whether the contact update is enabled: Yes No Not defined
SMTP blacklist Number	Add the email address transactions forbidden from the sender. This is applicable only if you enabled the update for the contact.

Delete a Contact

Deletes a contact.

Connection	Establish a connection to your Sendinblue account.
Email Address	Enter the email address you want to delete.

Lists

Watch Lists

Triggers when a new list is created.

Connection	Establish a connection to your Sendinblue account.
Limit	Enter the maximum number of lists Integromat should return during one scenario execution cycle.

List Lists

Lists all lists.

Connection	Establish a connection to your Sendinblue account.
Limit	Enter the maximum number of lists Integromat should return during one scenario execution cycle.

Get a List

Returns details about a list.

Connection	Establish a connection to your Sendinblue account.
List ID	Select the List ID whose details you want to retrieve.

Create a Lists

Creates a list.

Connection	Establish a connection to your Sendinblue account.
Folder	Select the folder in which you want to create the list.
Name	Enter the name of the list.

Update a List

Updates a list.

Connection	Establish a connection to your Sendinblue account.
Folder ID	Select the Folder ID whose list you want to update.
I want to update	Select the option you want to update: A name A folder
Name	Enter a new name for the list.
Folder	Select the folder to which you want to move the list.

Delete a List

Deletes a list.

Connection	Establish a connection to your Sendinblue account.
List ID	Select the List ID you want to delete.

Folders

Watch Folders

Triggers when a new folder is created.

Connection	Establish a connection to your Sendinblue account.
Limit	Enter the maximum number of folders Integromat should return during one scenario execution cycle.

List Folders

Lists all folders.

Connection	Establish a connection to your Sendinblue account.
Limit	Enter the maximum number of folders Integromat should return during one scenario execution cycle.

Get a Folder

Returns details about a folder.

Connection	Establish a connection to your Sendinblue account.
Folder ID	Select the Folder ID whose details you want to retrieve.

Create a Folder

Creates a folder.

Connection	Establish a connection to your Sendinblue account.
Name	Enter the name of the folder.

Update a Folder

Updates a folder.

Connection	Establish a connection to your Sendinblue account.
Folder ID	Select the Folder ID you want to update.
Name	Enter a new name for the folder.

Delete a Folder

Deletes a folder.

Connection	Establish a connection to your Sendinblue account.
Folder ID	Select the Folder ID you want to delete.

Campaigns

Watch Email Campaigns

Triggers when a new email campaign is created.

Connection	Establish a connection to your Sendinblue account.
Type	Select the email campaign type you want to watch: Trigger Classic
Status	Select the status email campaigns you want to watch: Suspended Archive Sent Queued Draft In process
Limit	Enter the maximum number of folders Integromat should return during one scenario execution cycle.

List Email Campaigns

List all email campaigns.

Connection	Establish a connection to your Sendinblue account.
Type	Select the email campaign type you want to watch: Trigger Classic
Status	Select the status email campaigns you want to watch: Suspended Archive Sent Queued Draft In process
Start Date	Enter the start date of the campaign.
End Date	Enter the date of the campaign.
Limit	Enter the maximum number of campaigns Integromat should return during one scenario execution cycle.

Create an Email Campaign

Creates a new campaign.

Connection	Establish a connection to your Sendinblue account.
Name	Enter the name of the email campaign.
Select Sender	Select the sender option: from the list by setting the email
Email	Enter the email address from which you will send the campaign.
Name	Enter the name that appears when you send the campaign email.
Sender	Select the email address from which you will send the campaign.
HTML Content	Enter the body message of the email campaign.
HTML URL	Enter the HTML URL of the email message.
Template	Select the template for the email campaign.
Subject	Enter the subject line of the email campaign.
Tag	Enter the keywords that filter the email campaigns when searching.
Scheduled at	Enter the date and time when the email campaign is scheduled to send.
Reply To	Enter the email address to which the campaign recipients can reply to.
To Field	Enter the email address or first name or last name of the recipient.
Lists	Select the list in which the recipient email address exists.
Exclusion Lists	Select the list to which you do not want to send the campaign.
Attachment URL	Enter the file attachment URL which you want to send along with the campaign. For example, `PDF`.
Inline Image Activation	Select whether you want to display the images in the campaign: Yes No Not defined
Mirror Active	Select whether you want to activate the mirror link: Yes No Not defined
Header	Enter the header of the email campaign.
Footer	Enter the footer of the email campaign.
UTM Campaign	Enter the UTM campaign value. If no value is provided, the campaign name will be used. You can enter alphanumeric characters.
Params	Add any additional parameters: Name Enter the name of the parameter. For example, `First Name`. Value Enter the value of the parameter. For example, `Joe`.
Send at best time	Select whether you want to send the campaign at the best time: Yes No Not defined
A/B Testing	Select whether you want to perform the A/B testing of the campaign before sending: Yes No Not defined
Subject A	Enter the variant A value.
Subject B	Enter the Variant B value.
Split Rule	Enter the size of the test groups with whom you are performing A/B tests.
Winner Criteria	Enter the details of the winning criteria. Mandatory if splitRule >= 1 and < 50. If splitRule = 50, 'winnerCriteria' is ignored if passed.
Winner Delay	Enter the duration of the test in hours by which you want to delay. You can delay a maximum of seven days or 168 hours. The winning version will be sent at the end of the test. Mandatory if splitRule >= 1 and < 50. If splitRule = 50, 'WinnerDelay' is ignored if passed.
IP Warmup Enable	Select whether you want to enable IP warmup: Yes No Not defined
Initial Quota	Enter an initial quota greater than 1 for warming up your IP. We recommend you set a value of 3000.
Increase Rate	Enter the increase value in percentage. This field is mandatory if you have select yes for the IP warm up. Enter the percentage increase rate. It is recommended to set the increase rate to 30% per day. If you want to send the same number of emails everyday, then set the daily increase value as 0%.

Get an Email Campaign

Returns details about an email campaign.

Connection	Establish a connection to your Sendinblue account.
Campaign ID	Select the Campaign ID whose details you want to retrieve.

Update an Email Campaign

Updates an email campaign.

Connection	Establish a connection to your Sendinblue account.
Campaign ID	Enter the Campaign ID you want to update. You can get the Campaign ID by using the Get Campaign ID module.
Name	Enter the name of the email campaign.
Select Sender	Select the sender option: from the list by setting the email
Email	Enter the email address from which you will send the campaign.
Name	Enter the name that appears when you send the campaign email.
Sender	Select the email address from which you will send the campaign.
HTML Content	Enter the body message of the email campaign.
HTML URL	Enter the HTML URL of the email message.
Template	Select the template for the email campaign.
Subject	Enter the subject line of the email campaign.
Tag	Enter the keywords that filter the email campaigns when searching.
Scheduled at	Enter the date and time when the email campaign is scheduled to send.
Reply To	Enter the email address to which the campaign recipients can reply to.
To Field	Enter the email address or first name or last name of the recipient.
Lists	Select the list in which the recipient email address exists.
Exclusion Lists	Select the list to which you do not want to send the campaign.
Attachment URL	Enter the file attachment URL which you want to send along with the campaign. For example, `PDF`.
Inline Image Activation	Select whether you want to display the images in the campaign: Yes No Not defined
Mirror Active	Select whether you want to activate the mirror link: Yes No Not defined
Header	Enter the header of the email campaign.
Footer	Enter the footer of the email campaign.
UTM Campaign	Enter the UTM campaign value. If no value is provided, the campaign name will be used. You can enter alphanumeric characters.
Params	Add any additional parameters: Name Enter the name of the parameter. For example, `First Name`. Value Enter the value of the parameter. For example, `Joe`.
Send at best time	Select whether you want to send the campaign at the best time: Yes No Not defined
A/B Testing	Select whether you want to perform the A/B testing of the campaign before sending: Yes No Not defined
Subject A	Enter the variant A value.
Subject B	Enter the Variant B value.
Split Rule	Enter the size of the test groups with whom you are performing A/B tests.
Winner Criteria	Enter the details of the winning criteria. Mandatory if splitRule >= 1 and < 50. If splitRule = 50, 'winnerCriteria' is ignored if passed.
Winner Delay	Enter the duration of the test in hours by which you want to delay. You can delay a maximum of seven days or 168 hours. The winning version will be sent at the end of the test. Mandatory if splitRule >= 1 and < 50. If splitRule = 50, 'WinnerDelay' is ignored if passed.
IP Warmup Enable	Select whether you want to enable IP warmup: Yes No Not defined
Initial Quota	Enter an initial quota greater than 1 for warming up your IP. We recommend you set a value of 3000.
Increase Rate	Enter the increase value in percentage. This field is mandatory if you have selected yes for the IP warm up. Enter the percentage increase rate. It is recommended to set the increase rate to 30% per day. If you want to send the same number of emails everyday, then set the daily increase value as 0%.

Delete an Email Campaign

Deletes an email campaign.

Connection	Establish a connection to your Sendinblue account.
Campaign ID	Select the Campaign ID you want to delete.

Other

New Event

Triggers when a new email event occurs.

Webhook Name

Enter a name for the webhook.

Connection

Establish a connection to your Sendinblue account.

Select the type of event you to be notified about

Select the event type for which you want to receive the notifications:

transactional
marketing

Events

Select the event for which you want to receive the notifications.

event name in Integromat	event name in Sendinblue UI
request	Sent
delivered	Delivered
hard bounce	Hard Bounce
soft bounce	Soft Bounce
blocked	Blocked
spam	Compliant
invalid email	Invalid email
deferred	Deferred
opened	Opened
clicked	Clicks
unsunscribe	Unsubscribed
unique opened	First opening

See the Connecting to Sendinblue Webhook using Integromat to add the webhook in your Sendinblue account.

Send an SMS

Sends a transactional email.

Connection	Establish a connection to your Sendinblue account.
Sender	Enter the name of the sender who is sending the SMS.
Recipient	Enter the recipient's phone number along with the country code.
Content	Enter the message text.
Type	Select the SMS type: transactional marketing
Webhook to call for each event triggered by the message (delivered etc.).	Enter the webhook details if applicable.
Tag	Enter the keyword to filter the SMS when searching.

Send an Email

Sends a transactional email.

Connection	Establish a connection to your Sendinblue account.
Template	Select the template for the email.
To	Add the email addresses to which you want to send an email: Name Enter the name of the person. Email Enter the email address of the person.
Subject	Enter the subject line of the email.
HTML Body	Enter the email message.
Text Body	Enter the email message if you have not selected any template for the email.
Name	Enter the name of the person to which the email recipient can reply to.
Email	Enter the email address of the person to which the email recipient can reply to.
Attachments	Add the attachments of the email: Type Select the attachment type: URL Data File name Enter the file name with the file extension. For example, `sample.doc`. Image URL Enter the attachment or image URL address. Data Enter the file data to the field or map the source of the file.
BCC	Add the email addresses which you want to add in BCC field of the email: Name Enter the name of the contact Email Enter the email address of the contact.
CC	Add the email addresses which you want to add in CC field of the email: Name Enter the name of the contact. Email Enter the email address of the contact.
Name	Enter the name of the sender.
Email	Enter the email address of the sender.
Headers	Enter the email header. Pass the set of custom headers (not the standard headers) that shall be sent along with the mail headers in the original email. 'sender.ip' header can be set (only for dedicated IP users) to mention the IP to be used for sending transactional emails. Headers are allowed in `This-Case-Only` (words separated by hyphen with first letter of each word in capital letter), they will be converted to such case styling if not in this format in the request payload.
Tags	Enter the keywords as tags to filter the emails when searching.
Params	Add any additional parameters: Name Enter the name of the parameter. For example, `First Name`. Value Enter the value of the parameter. For example, `Joe`.

Send a Campaign Report

Sends a PDF campaign report to the specific email.

Connection	Establish a connection to your Sendinblue account.
Campaign	Select the campaign whose report you want to send.
Subject	Enter the subject line of the email.
To	Add the email address to whom you are sending the email: Text Enter the email address of the recipient.
Content Type	Select the content-type: HTML Text
Body	Enter the email body text.
BCC	Add the email addresses which you want to add in BCC field of the email: Name Enter the name of the contact Email Enter the email address of the contact.
CC	Add the email addresses which you want to add in CC field of the email: Name Enter the name of the contact Email Enter the email address of the contact.
Language	Select the language in which you want to send the email with the campaign report.

Make an API Call

Performs an arbitrary authorized API call.

Connection	Establish a connection to your Sendinblue account.
URL	Enter a path relative to `https://api.sendinblue.com/`. For example: `/v3/accounts` For the list of available endpoints, refer to the Sendinblue API Documentation.
Method	Select the HTTP method you want to use: GET to retrieve information for an entry. POST to create a new entry. PUT to update/replace an existing entry. PATCH to make a partial entry update. DELETE to delete an entry.
Headers	Enter the desired request headers. You don't have to add authorization headers; we already did that for you.
Query String	Enter the request query string.
Body	Enter the body content for your API call.

Example of Use - List Tasks

The following API call returns all tasks from your CloudFront account:

URL:
/v3/emailCampaigns

Method:
GET

Matches of the search can be found in the module's Output under Bundle > Body > data.
In our example, 1 campaign is returned:

Get My Account

Return details about my account.

Connection

Establish a connection to your Sendinblue account.

Connecting to Sendinblue Webhook using Integromat

1. In the Integromat, New Event module, enter the details as mentioned in the New Event and copy the address to your clipboard.

2. Login to your Sendinblue account. From the left menu, click Settings > Webhook (configure).

3. Click Add Webhook.

4. In the URL to post to field, enter the URL address copied in step 1, select the events you want to watch,, add any details about the webhook, and click Add.